Chapter 6: Operating System Recovery 6-5Completing the OS Installation (Win2000)The system automatically reboots when the image recovery is completeand starts the software installation. This installation also installs most ofthe additional software and drivers that are included in the disk image.Complete the installation as follows.1. After the terminal reboots, it will perform a disk check and thencontinue with the Windows 2000 installation.2. Enter the User Name and Organization.3. Enter the Computer Name for the client.4. Enter the Administrator’s Account Password (optional)5. When prompted, press Finish to reboot the client.6. Login when prompted.7. Run the MicroTouch screen calibration from the Desktop icon.Completing the OS Installation (WinXPe)The system automatically reboots when the image recovery is completeand starts the software installation. This installation also installs most ofthe additional software and drivers that are included in the disk image.Complete the installation as follows.1. Click the Admin button to login as Administrator.2. Read the EULA (End-User License Agreement) information in theDOS window, then type EXIT and press Enter to close the DOSwindow.3. Start the Network Setup Wizard.4. Select options to identify the network information for the terminalenvironment.5. Enter the Computer Description.6. Enter the Computer Name.7. Enter the Workgroup Name.8. When prompted, press Finish to reboot the terminal.
