Programming10-03 : PCB Setup118 ◆ NetworkingConditions(A.) When changing a defined terminal type, first set the type to ë0í and then plug the new device into have the system automatically define it or redefine the type manually.(B.) The system must have a PCB installed in order to view/change the options for that type ofPCB.Feature Cross ReferenceNoneTelephone Programming InstructionsTo enter data for Program 10-03 (PCB Setup):1. Enter the programming mode.2. 10 033. Enter the number of the item you want to program.4. Select a slot number to be programmed by pressing the VOLUME ▲ or VOLUME ▼ keys.Or, press FLASH once to select the slot number or press FLASH twice to select a port num-ber. Enter the slot or port number.5. Enter data for the item you selected + HOLD.6. Enter data for the next item in the program.ORPress MSG once to enter a new item number.ORPress MSG until youíve exited that seriesís programming section.10-02-01 Slot No 1ESIport01 CH1 1 :TEL |1back ↑↑↑↑ ↓↓↓↓ select10-02-nn Slot No 1nnnnnback ↑↑↑↑ ↓↓↓↓ select
