FeaturesMessage WaitingNetworking ◆ 77Message WaitingMessage WaitingThis feature can be used when placing an intercom call to a networked extension and receives eitherno answer or hears a busy tone.With a networked system, when a Message Waiting has been left, there is a slight difference in the tele-phoneís display. With a single system, the extensionís name which left the message is displayed. With anetworked system, the extension number is displayed.OperationTo leave a Message Waiting:1. Call busy or unanswered extension.2. Dial 0 or press Message Waiting key (PGM 15-07 or SC 851: 38)3. Hang up.With keyset phones, the MW LED lights.To answer a Message Waiting:When you have a message, your MW LED flashes fast for keysets.1. At a keyset, press idle CALL key and dial *0.ORPress Message Waiting key (PGM 15-07 or SC 851: 38).ORAt single line telephones, lift the handset and dial *0.If the called extension doesnít answer, dial 0 or press your Message Waiting key toautomatically leave them a message.Normally, your MW LED goes out. If it continues to flash, you have new messages in yourìVoice Mailî mailbox or a new ìGeneral Messageî. Go to ìTo check your messagesî below.Related ProgramsProgram Number Title11-11-09 Service Code Setup (for Setup/Entry Operation) - Answer MessageWaiting11-11-10 Service Code Setup (for Setup/Entry Operation) - Cancel All MessagesWaiting11-11-11 Service Code Setup (for Setup/Entry Operation) - Cancel MessageWaiting11-16-07 Single Digit Service Code Setup: Message Waiting20-13-07 Class of Service Options (Supplementary Service) - Message Waiting
