Programming44-02 : Dial Analysis Table for ARS/F-Route AccessNetworking ◆ 19744-02 : Dial Analysis Table for ARS/F-Route AccessDescriptionUse Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set the Pre-TransactionTable for selecting ARS/F-Route.Input DataLevel: Aspire S Aspire M/L/XLIN ï Available. ï Available.ï Applicable to IP and ISDN Networking. ï Applicable to IP and ISDN Networking.Dial Analysis Table Number 1-120Item No. Item Input Data Default01 DialSet the number of digits to be analyzed by thesystem for ARS routing.Up to 8 digits(Use line key 1 for a ìDonít Careîdigit, @)Nosetting02 Service Typeï Service Type 1 (Extension number)The number goes to an extension after delet-ing the front digit(s).Additional dataAssign the digit(s) to be deleted on top of thenumber for extension number usage. Theremust be at least one digit deleted.ï Service Type 2 (ARS/F-Route)The number is controlled by ARS/F-Routetable.Additional dataIf the ARS/F-Route Time Schedule is notused, assign the ARS/F-Route table numberfor Program 44-05.If the ARS/F-Route Time Schedule is used,assign the ARS/F-Route selection number forProgram 44-04.ï Service Type 3 (Dial Extension AnalyzeTable)The total length of the number exceeds morethan 8 digits.Additional dataAssign the Dial Extension Analysis Tablenumber to be used in Program 44-03.0=No setting1=Extension Call2=ARS/F-Route Table3=Dial Extension Analyze Table0
