Programming84-02 : H.225, H.245 Information Basic Setup224 ◆ Networking84-02 : H.225, H.245 Information Basic SetupDescriptionUse Program 84-02 : H.225, H.245 Information Basic Setup to define the data of H.225 andH.245.It is recommended that these settings are left at the default values unless you are advised to changethe values by NEC Infrontia.Input DataLevel: Aspire S Aspire M/L/XLIN ï Available. ï Available.ï Applicable to IP Networking. ï Applicable to IP Networking.ItemNo. Item Input Data Default Description01 H.225 Alerting Timer 0-255 sec 180 sec02 H.225 Setup Acknowledge Timer 0-255 sec 9 sec03 H.225 Setup Timer 0-255 sec 4 sec04 H.225 Info Ack Timer 0-255 sec 9 sec05 H.225 Call Proceeding Timer 0-255 sec 10 sec06 -- Not Used --07 H.245 Master Slave Determination Timer 0-255 sec 5 sec08 H.245 Master Slave Determination RetryCount0-255 sec 3 sec09 H.245 Capability Exchange Timer 0-255 sec 5 sec10 H.245 Logical Channel EstablishmentTimer0-255 sec 50 sec Unidirectional or bi-directional logi-cal channel establishment timer11 H.245 Mode Request Procedures Timer 0-255 sec 50 sec12 H.245 Close Logical Channel Timer 0-255 sec 50 sec13 H.245 Round Trip Delay Timer 0-255 sec 50 sec14 H.245 Maintenance Loop 0-255 sec 50 sec15 RAS GRQ Timer 0-255 sec 5 sec16 GRQ Retry Count 0-255 217 RAS RRQ Timer 0-255 sec 5 sec18 RRQ Retry Count 0-255 319 RAS URQ Timer 0-255 sec 3
