Programming26-01 : Automatic Route Selection ServiceNetworking ◆ 18926-01 : Automatic Route Selection ServiceDescriptionUse Program 26-01 : Automatic Route Selection Service to define the system options for Auto-matic Route Selection (ARS).Input DataLevel: Aspire S Aspire M/L/XLIN ï Available. ï Available.ï Option 6 available with 2.63+ software. ï Option 6 available with 2.63+ software.Item No. Item Input Data Default01 ARS ServiceEnable or disable ARS.0 = Disable1 = Enable002 Network Outgoing Inter-Digit ARS TimerWith Networking, this timer replaces20-03-04 when determining if all networkprotocol digits have been received. If ARS isenabled at Site B, this timer can be pro-grammed for 5 (500 msec) at Site A. If ARSis disabled and Site B is using F-Route foroutbound dialing, this timer should be pro-grammed for 30 (3 seconds) at Site A.0-64800 (msec.) 3003 ARS Misdialed Number HandlingIf a user dials a number not programmed inARS, this option determines if the systemshould route over trunk group 1 or play errortone.0 = Route to TrunkGroup 11 = Play WarningTone to Dialer104 LCR Mode - Not Used in the U.S. - 006 ARS COS Match AccessWith the ARS Class of Service MatchAccess feature, you can determine whetherthe system should allow a call based on theCOS assigned to the Dial Analysis Table(Program 26-02). This change can be used tocreate a tenant-like application. It will thenuse the trunk group defined in the AdditionalEntry in Program 26-02-03 to place the out-going call.When this feature is enabled, the calls willbe routed in sequential order, and will for-ward provided the Class of Service for thetrunk groups match.0 = Disabled (COSnot compared)1 = Enabled (COSMatch Access)0
