94To Switch the Line Indicating Double HeightCharactersBy pressing the soft key or the Line/Feature key, youcan switch the characters displayed to double heightsize in the order of "Enlarged Characters (2nd line)" →"Enlarged Characters (3rd line)" → "No EnlargedCharacters".The following shows an example when using this fea-ture.• No Enlarged Characters• Enlarged Characters (2nd line)• Enlarged Characters (3rd line)TO MAKE AN EXTERNAL CALLWhen a dialed telephone number is registered in Per-sonal Directory, the corresponding name informationwill be displayed on LCD of DT830 Series while youare hearing a ringback tone or are engaged in a con-versation. According to the initial settings, the displaymay differ from the following examples. For more infor-mation, contact the system administrator.STEP 1: Lift the handset or press key, receivea dial tone.STEP 2: Dial the Central Office access code, e.g. 9.Mic NoDist >>>7:25 AM MON 11 MAY 201531313Mic NoDist >>>7:25 AM MON 11 MAY 201531313Mic NoDist >>>313137:25 AM MON 11 MAY 2015Note: Personal Directory Name Display function isavailable only for DT830 Series.Note: Here describes the Normal Dial Mode. Regardingthe other mode, see TO ORIGINATE A CALLUSING SELECTIVE DIALING (DYNAMIC DIALPAD, PRESET DIAL) in Chapter 5.DT830 DT430/410Speaker1:25 PM MON 11 MAY 2015Mic NoDist >>>31313My Line Information (Name and Station Number)Ken Kobus1:25 PM MON 11 MAY 2015Mic PickUp CF-All >>>9Dialed Code
