190• To Search by NameSTEP 1: Open the Directory screen (see TO ADDNEW DATA).STEP 2: Select Search.Select an item by either of the following operations.• Highlight an item by using or UP/DOWN soft key,and then press , or OK soft key.• Press key.STEP 3: Select Name.Select an item by either of the following operations.• Highlight an item by using or UP/DOWN soft key,and then press , or OK soft key.• Press key.STEP 4: Enter a target name.After entering the name, Press or OK soft key.1112[Directory]340Own NumberDelete AllEditOKMenuGroup SettingSearch2212[Search]34 OthersOKBackTel NumberGroupNameNote: A distinction is made between upper case andlower case characters, according as the systemsettings. For example, "Ken Kobus" and "kenkobus" are distinguished as different characterstrings. For details, contact the System adminis-trator.Note: A blank space is also distinguished while search-ing database for a name.Note: Even if the name is not entered to the end, youcan search for a name.Note: If there is no entry corresponding to the enteredname, "No data" is issued.Note: Up to 32 characters can be entered as a com-pany name. For details on character entrymethod, see HOW TO INPUT CHARACTERS.Input a name.[Name]OKBackOptionBKA
