153Using Soft KeySTEP 1: Press the Save&Rep key. The number isstored in memory.STEP 2: The Save&Rep key’s LED lights.To Verify (Only For Terminal With LCD)STEP 1: While an idle state, press the Save&Rep key.STEP 2: The display indicates digits sorted.To RepeatSTEP 1: Press key.STEP 2: Press the Save&Rep key. The terminal auto-matically redials the programmed number.STEP 3: The Save&Rep automatically cancelled. LEDgoes out.Using Soft KeySTEP 1: Press flashing the Save&Rep soft key.Stored number is automatically redialed.“Save&Rep” disappears from display.TO LEAVE A MESSAGESTEP 1: Press key. Receive a dial tone.STEP 2: Dial the desired station number. Encounterno answer or busy condition.STEP 3: Press the MSG key. The message is sent tocalled the terminal.STEP 4: The called station MSG LED lights.Note: If saved number is busy or no answer is received,to save it again, press the Save&Rep key againbefore hanging up.SpeakerNote: Up to four messages can be stored in the termi-nal memory.Note: If a fifth message is attempted, a reorder tone isheard and the display indicates as follows:Note: If a station is not equipped to receive messages,a reorder tone is heard and the display indicatesas follows:DT830 DT430/410SpeakerCalled stationMESSAGE SET 20011:25 PM MON 11 MAY 2015MESSAGE BUSY1:25 PM MON 11 MAY 2015MESSAGE REST1:25 PM MON 11 MAY 2015
