137To Bridge Into A Dial Intercom CallSTEP 1: Press the DICM key, lift handset or presskey.STEP 2: A three-party conference is established.CONFERENCESTEP 1: With a call in progress, press key anddial desired number.STEP 2: After call is answered, press the Conf. softkey. Three-way conference is established.STEP 3: If one party hang up, other two remain con-nected. The Conf key’s LED goes out.TO SWITCH A CALL WITH TRANS-FER KEYSTEP 1: While engaged in a call and wishing to con-sult a third party, press key. The orig-inal caller is automatically placed on hold.STEP 2: Dial desired party to consult.STEP 3: Press key to return to original caller.Third party is automatically placed on hold.STEP 4: By repeating these steps, it is possible to al-ternate between calls. The display indicatesconnected station or trunk any given time.Note: Bridging is an optional feature.Note: Dial intercom provides a Dial Intercom groupwhere each member of the group may be calledby a 1-digit or 2-digit number without using theirprime lines.SpeakerOverriding partyOVERRIDE 31:25 PM MON 11 MAY 2015CONF1:25 PM MON 11 MAY 2015Note: The Conf key is accommodated on only DTZ-2E-3 and DTZ-6DE-3. If using the terminals withoutkey, use a soft key or programmablefeature key to which conference feature has beenassigned.DT830 DT430/410TransferCONFMic >>>1:25 PM MON 11 MAY 2015ConfDT830 DT430/410TransferTransfer
