150To CancelSTEP 1: Press key. Receive dial tone. If can-celing for another station, press MULTILINEAPPEARANCE feature key.STEP 2: Press the FWD-NA key or dial “Call Forward-ing - Don't Answer” cancel code. Receive ser-vice set tone. LED goes out at your station (orthe terminal of the multiline station).STEP 3: Press key. Call Forwarding – Don’tAnswer is cancelled.LOGGED OUT IP STATION - CALLDESTINATIONTo SetSTEP 1: Lift handset or press key.STEP 2: Press the CFLogout key or dial “Logged OutIP Station – Call Destination” access code.STEP 3: Dial the destination station number; receive aservice set tone.STEP 4: Replace the handset or press key.Logged Out IP Station – Call Destination isset.Using Soft KeySTEP 1: Press the CFLogout soft key; receive a spe-cial Dial Tone.STEP 2: Dial the destination station number.STEP 3: Receive a service set tone; “FORWARDSET” is displayedSpeakerSpeakerFORWARD CANCEL1:25 PM MON 11 MAY 2015DT830SpeakerSpeakerFORWARD SET XXXX1:25 PM MON 11 MAY 2015FORWARD SET XXXXMic >>>1:25 PM MON 11 MAY 2015
