NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

Contents

4-46 Upgrading Your System6. Feed the cables of the replacement LED assembly through the mounting holes in the front andside of the chassis.7. Insert the bottom tab of the LED assembly into mounting hole in the front of the chassis andwhile pushing downward on the top tab of the LED assembly, snap the LED assembly intoplace.8. Connect the power and hard disk drive LED cables to the system board connectors. The powerLED cable is green and black; insert the connector so that the green wire is above the blackwire. The hard disk drive LED cable is red and black; insert the connector so that the red wireis above the black wire.9. Install the front panel as described earlier in this chapter.10. Install the side panels as described earlier in this chapter.11. Power on the system.