Configuring Your System 3-13System Management SubmenuFeature Choices Description Your SettingSever Management Info Press ENTER Refer to “System Management Info Submenu.”System Event Logging DisabledEnabledWhen enabled, system events will be logged byBIOS and BMC.Clear Event Log NoYesYes clears the system event log (SEL) in BMC.EMP Password switch DisabledEnabledEnables EMP password.EMP Password [A…Z, 0 9] This field only shows up when EMP password isenabled.EMP ESC Sequence Refer to Appendix B.EMP Hangup Line String Refer to your modemdocumentation.Modem Init String Refer to your modemdocumentation.High Modem Init String Refer to your modemdocumentation.EMP Access Mode Pre-boot OnlyAlways ActiveDisabledPre-boot Only - EMP is only enabled during powerdown through power up to the end of POST. Com 2is returned to system use at the end of Post whenoperating system boots.Always Active - EMP is always enabled. Com 2cannot be used by operating system. It is nowdedicated for EMP use.Disabled - EMP is disabled. Com 2 is alwaysavailable for system use by console redirection oroperating systemEMP Restricted Mode Access DisabledEnabledIf set to Enabled, Power on/off and Reset servercontrols via EMP are no longer available.EMP Direct Connect/ModemMode Direct ConnectModem ModeSets how EMP connects to the server. Direct Connectmeans a null modem serial cable directly connectsCOM 2 connector port to the EMP console machine.Modem mode indicates that a modem is connectedon COM 2 for EMP use.
