6-4 TroubleshootingPlease select the operating system to start:Windows Server 2003, EnterpriseMicrosoft Windows Recovery ConsoleStarting up Recovery ConsoleYou can start up Recovery Console in two ways: Start up Recovery Console installed on the system. Start up Recovery Console from the Windows Server 2003 CD-ROM. Installing Recovery Console on the system1. Start up the NEC Express5800/ft series and log on to Windows Server 2003.2. Insert the Windows Server 2003 CD-ROM into the drive.3. From [Start] of the taskbar, select [Run...] to run.CD-ROM drive:\i386\winnt32.exe /cmdcons /syspart:c: /tempdrive:c:4. Follow the messages that appear on the screen to continue. Starting up the Recovery Console1. Disable the configuration for boot monitoring function.Select [Advanced] - [Monitoring Configuration] - [Boot Monitoring] and choose“Disabled”. See “Step 3: Disable Boot Monitoring Function” (4-11) for details.2. Power on the system.(a) Select Microsoft Windows Recovery Console in “Please select the operatingsystem to start:”.(b) When the following message appears on the screen press F5 + F6 quickly.IMPORTANT: Unless F5 + F6 keys are pressed, Recovery Consoledoes not start up. If the screen for selecting HAL as described in 3 doesnot appear, reboot the system and start again from selection of anoperating system.