NEC Express 320Lc User Manual

Also see for Express 320Lc: User guide User guide User guide

Contents

4-18 Windows Setup9. Important 4” message will appear.Read the message and follow the instructions.10. “Important 5” message will appear.Read the message and follow the instructions.11. When the following message appears, read it and press Enter.The message below appears and the hard disk is initialized.While this message is being displayed, the hard disk is being initialized. Please wait.When the hard disk initialization is complete, the NEC Express5800/ft series automaticallyrestarts. After the NEC Express5800/ft series is restarted, the following message appears andstarts formatting the hard disk drive.This process will delete all files on the system drive and installWindows Server 2003 Enterprise Edition. Then it will install additionalsoftware for your Express5800/ft series server.Note - This process will reboot the system.Please leave the CD in the CD-ROM drive.Note - Boot Monitoring must be disabled before beginningthe Windows Server 2003 installation.(BIOS Setup - Advanced\Monitoring Configuration menu).Warning - Back up any data on the system drive to be saved before proceeding.Do you want to continue the installation [Y,N]?** User input will be required in approximately 15 minutes…(2 reboots will take place automatically…)Initializing the disk...*** Important Notice 4- All PCI and CPU modules should be inserted into the server.If there are any removed PCI or CPU modules, please insert themat this time and press any key to continue the installation process.Strike a key when ready . . .*** Important Notice 5- No LAN cables should be connected to this server at this time.If any LAN cables are connected to this server, please removethem and press any key to continue the installation process.Strike a key when ready . . .