4-44 Windows Setup(After modification)Step 9: Create VolumeWith NEC Express5800/ft series, all volumes needs to be mirrored.For creating a new volume other than the volume where system partition is stored, see “Hard DiskConfigurations that can be Built on the NEC Express5800/ft series” in the separate volume of theUser’s Guide. For creating volumes and mirroring, see Windows online help and “Step 6: Set DualDisk Configuration” (page 4-34).IMPORTANT:- Models supporting the RDR function mirror built-in disks by disk by the RDR function. Youdo not need to mirror the disks by volume. For mirroring using the RDR function, see “Setting Dual Disk Configuration by the RDR (Rapid Disk Resync) function” in “Step 6: SetDual Disk Configuration” (page 4-38).- Volumes can be created after the system operation is started. To create a volume, see “HardDisk Configurations that can be Built on the NEC Express5800/ft series” in the separatevolume of the User’s Guide.[boot loader]timeout=30default=multi(0)disk(0)rdisk(0)partition(1)\WINNT[operating systems]multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows Server 2003, Enterprise" /fastdetect /PAE