NEC Express 5800 Series Installation Manual

Also see for Express 5800 Series: Maintenance Guide User guide User guide User guide

Contents

1. Setup ProcedureExpress5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)56Chapter 1 Installing OS1.11.2 Installing Additional PackagesConnect to the ESXi host from vSphere Client to configure.Important Be sure to connect to the ESXi host from vSphere Client.Do not connect to the vCenter Server.1. Set the ft control software Install DVD to the DVD drive of the machine where vSphere Client isinstalled.2. Select the ftSys Management Appliance in the left pane of vSphere Client, and click the CD/DVDbutton on toolbar to connect with the DVD drive that contains ft control software Install DVD.3. Log in to ftSys Management Appliance as a root user.4. Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of thedirectory is unnecessary by mkdir command.# mkdir /mnt/cdrom# mount /dev/cdrom /mnt/cdrom5. Run the installer of additional package.• When ftSys Management Appliance is set as the log server# /mnt/cdrom/NEC/install.sh• When a separate Linux server is set as the log server# /mnt/cdrom/NEC/install.sh –a6. Select a keyboard layout ("us" for English 101 or "jp" for Japanese 106), and press Enter.Please choose a keyboard layout: [us(101) | jp(106)]7. Select a language (English or Japanese) for NEC ESMPRO report table and enter "E" or "J".Please choose a language for ESMPRO alert messages: [E(nglish) | J(apanese)]Note If using a separate Linux server as the log server, this message will not appear.Tips NEC ESMPRO Report Table installed in this step is used by NEC ESMPRO Agent. SeeChapter 2 (1.1 NEC ESMPRO Agent) for detail of NEC ESMPRO Agent.8. The IP address of the ESXi host is displayed.Make sure that the IP address shown is correct, enter the root password for the ESXi host, and pressEnter.ESXi host: xxx.xxx.xxx.xxxEnter the root password:9. The message prompting you to configure the log server appears. Enter the IP address of log server orthe machine name, and press Enter. You can skip this step and set it later. (In that case, see Chapter3 (1. Steps for Configuring the Separate Log Server).Note The message does not appear when ftSys Management Appliance is configured as the logserver.