NEC Express 5800 Series Installation Manual

Also see for Express 5800 Series: Maintenance Guide User guide User guide User guide

Contents

1. Bundled Software for the ServerExpress5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5) 71Chapter 2 Installing Bundled Software1.1.2 Install NEC ESMPRO AgentConnect to the ESXi host from vSphere Client to configure.Important Be sure to connect to the ESXi host from vSphere Client.Do not connect to the vCenter Server.1. Set the ft control software Install DVD to the DVD drive of the machine where vSphere Client isinstalled.2. Select the ftSys Management Appliance in the left pane of vSphere Client, and click the CD/DVDbutton on toolbar to connect with the DVD drive that contains ft control software Install DVD.3. Log in to ftSys Management Appliance as a root user.4. Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of thedirectory is unnecessary by mkdir command.# mkdir /mnt/cdrom# mount /dev/cdrom /mnt/cdrom5. Run the following command to change the directory that contains NEC ESMPRO Agent.# cd /mnt/cdrom/NEC/esmpro-sa/6. Run the following command to install the NEC ESMPRO Agent.# rpm -ivh Esmpro-*7. Run the following command to change setting of ESMstrg.# /sbin/chkconfig ESMstrg off8. Running the following command displays the messages as shown below.# cd /opt/nec/esmpro_sa/tools# ./sethwinfEnter the number and set the system information.1. Product Name: Other2. Product Manufacturer: Other3. Chassis Type: Others. Save and quitq. Quit without savePlease input your selection (1 to 3, s, q):Examples)1. Product Name: NEC Express5800/R320d-M42. Product Manufacturer: NEC3. Chassis Type: Rack9. Change directory, and unmount the ft control software Install DVD.# cd /# umount /mnt/cdrom