NEC Express 5800 Series Installation Manual

Also see for Express 5800 Series: Maintenance Guide User guide User guide User guide

Contents

2. Procedures after Completion of InstallationExpress5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)66Chapter 1 Installing OS2.3.3 Changing the Firewall Rules on ftSys Management ApplianceDefault Firewall RulesThe default firewall rules after the setup are as follows.Input/Output DestinationPort Source Port Protocol ServiceInput 514 67-68 udp syslogd *1Input 22 * tcp sshInput 67-68 67-68 udp bootpInput 80 * tcp httpInput 161 * * SNMPInput 443 * tcp httpsInput 3052 * * APCInput 5480 * tcp VAMIInput 6547 * tcp APCInput 8089 * tcp Apache/ftWebInput 8090 * tcp OSMCIM-IndicationsOutput 22 * tcp sshOutput 23 * tcp telnetOutput 53 1024-65535 * DNSOutput 67-68 67-68 udp bootpOutput 80 * tcp httpOutput 162 * * snmp-trapOutput 443 * tcp httpsOutput 5989 * tcp sfcbd/httpsOutput * 3052 * APC*1. When the log server is configured on ftSys Management ApplianceUse the report method except the Manager Report (SNMP), change the setting of the firewall. NEC ESMPROAgent (in the table referred to as Agent) list of port to use when the report is the following."Direction" in the table include the bi-directional arrows in the top row is at the starting time of thecommunication, and the lower shows the communication of return.Function in (Agent) Direction Out (default) NoteManager Report (SNMP) Auto → 162/udp Port opening(default)Manager Report (TCP/IP) Auto →← 31134/tcpVia the ManagerExpress Report Service Auto →← 31136/tcpHTTPS (Via the Manager)Express Report Service Auto →← 31138/tcpExpress Report Service(Internet email) Auto→← 25/tcp smtp→← 110/tcp pop3Express Report Service(HTTPS) Auto →← 443/tcp https Port opening(default)