1. Installing Internal Optional DevicesExpress5800/B120e-h User's Guide66Chapter 2 Preparations1.7.4 Resetting Management InformationReset the management information on the replaced Solid State Drive in the following procedure.1. Select Settings → Control Panel → NEC ESMPRO Agent from the Start menu.NEC ESMPRO Agent Properties is displayed.2. Click on the General tab in NEC ESMPRO Agent Properties.3. Select Storage Setting… in the General tab.Storage is displayed.4. Click on the Reset tab in Storage.5. After selecting the replaced Solid State Drive in Hard disk drive list, click on OK. (The Solid StateDrives are also listed in Hard disk drive list.)The management information on the replaced Solid State Drive is reset.6. Close the dialog box.7. Close NEC ESMPRO Agent Properties.
