1. Power-on of Blade ServerExpress5800/B120e-h User's Guide86Chapter 3 Setup1.2 Power ON from Network Serial PortDepending on the BIOS setting of the CPU blade, the power of the CPU blade may be automatically turned onby a proper packet received from the network or via the modem connected to the serial port.This power-on procedure can be specified by setting Wake On Events of System Hardware in the BIOSSETUP Utility.1.3 Power ON from Remote ConsoleThe power of the CPU blade can be turned on by using remote control feature of EXPRESSSCOPE Engine 3(BMC).1.4 Operation after Power ONIf the CPU blade is connected with a display unit, the NEC logo appears on the screen of the display unit aftera while from the power-on.Important Do not power off the server until NEC logo and some message appears.While the NEC logo appears, the CPU blade runs the self-diagnosis program (POST) to diagnose the CPUblade itself. Refer to Chapter 3 (1.5 POST).
