Installing Windows Server 2008 E-1514. The folder reference dialog box appears.Select a path in the NEC EXPRESSBUILDER DVD, and then click [OK]. If the N8103-129/130 RAID Controller is used:– Windows Server 2008 32-bit (x86) Edition:\017\win\winnt\oemfd\ws2008\fd1\megasas2– Windows Server 2008 64-bit (x64) Edition:\017\win\winnt\oemfd\ws2008x64\fd1\megasas2 If Onboard RAID controller (LSI Embedded MegaRAID TM) is used in theenvironment with which the USB DVD drive is connected:– Windows Server 2008 32-bit(x86) Edition:\017\win\winnt\oemfd\ws2008\fd1\megasr1– Windows Server 2008 64-bit(x64) Edition:\017\win\winnt\oemfd\ws2008x64\fd1\megasr1After you select the path, a list of drivers is displayed.Select the following driver, and then click [OK]. Go to Step 15. If the N8103-129/130 RAID Controller is used:[LSI MegaRAID SAS 9264-8i] If Onboard RAID controller (LSI Embedded MegaRAID TM) is used in theenvironment with which the USB DVD drive is connected:[LSI Embedded MegaRAID]NOTE: When the onboard RAID controller (LSI EmbeddedMegaRAID TM) is used in environment with built-in DVD drive, thework here is unnecessary.15. Remove the NEC EXPRESSBUILDER DVD and set Backup DVD-ROM or WindowsServer 2008 DVD-ROM.16. Select the disk where a partition will be created, and then click [Drive Option].IMPORTANT: If the partition has already been created, go tostep 19.17. Click [New], enter a partition size, and then click [Apply].18. Select the partition created in step 17, and then click [Format].19. Select the partition created, and then click [Next].
