G-6 Installing Windows Server 2003INSTALLING WINDOWS SERVER 2003Preparations for Installation NEC EXPRESSBUILDER DVD-ROM Microsoft Windows Server 2003 Standard Edition (CD-ROM)/ Microsoft WindowsServer 2003 Enterprise Edition (CD-ROM), Microsoft Windows Server 2003 R2 StandardEdition (CD-ROM)/ Microsoft Windows Server 2003 R2 Enterprise Edition (CD-ROM) Windows Server 2003 Service Pack (CD-ROM) User's Guide Getting Started Windows Server 2003 OEM-Disk for EXPRESSBUILDERCreating "Windows Server 2003 OEM-Disk for EXPRESSBUILDER"Before installing, create Windows Server 2003 OEM-Disk for EXPRESSBUILDER.NOTE: If you have already "Windows Server 2003 OEM-Disk forEXPRESSBUILDER" for NEC Express5800 Server which you aregoing to install Windows Server 2003, you do not need to create itagain.You can create Windows Server 2003 OEM-Disk for EXPRESSBUILDER with the following twoprocedures.Create from the menu which appears when running NEC Express5800 Server withNEC EXPRESSBUILDER.If you have only NEC Express5800 Server to create Windows Server 2003 OEM-Disk forEXPRESSBUILDER, use this procedure.If Windows Server 2003 or Windows can be operated on NEC Express5800 Server, you can use theother procedure described later.Follow the steps below.1. Prepare one Flash FDD, or one USB floppy disk drive and 3.5-inch floppy disk.2. Turn on your NEC Express5800 Server.3. Insert the NEC EXPRESSBUILDER DVD-ROM into the optical disk drive of the server.4. Press the RESET switch or press Ctrl, Alt and Delete to reboot the server. (You may alsoturn off and then on again to reboot the server.)The system will boot from the DVD-ROM and NEC EXPRESSBUILDER starts.5. Select [Create the OEM-DISK for Windows] from [Tools Menu] step.