NEC Express5800/T120e Maintenance Guidance

Also see for Express5800/T120e: Quick start guide Specifications Getting started User guide

Contents

1. System BIOSExpress5800/T120e Maintenance Guide 77Chapter 2 Useful FeaturesOption Parameter DescriptionThermal Sensor Disabled[Enabled]Enables or disables the thermal sensormonitoring feature. If this option is set toEnabled and when abnormal temperature isdetected, the system stops at the end ofPOST, and waits until the temperaturebecomes normal.Check previous System Config [Disabled]EnabledEnables or disables the feature to detectsystem configuration change.If this option is set to Enabled and thesystem configuration differs from theprevious boot, the system waits for user’sintervention before booting.BMC IRQ [Disabled]IRQ 11Specifies whether to allocate interrupt linesfor BMC.Post Error Pause Disabled[Enabled]Specifies whether to stop the POST once atthe end of POST if an error occurs during thePOST.Memory Error Halt[Boot]Specifies whether to stop operation at theend of POST processing if a memoryresource error occurred while executingPOST. This setting is enabled if POST ErrorPause in the Server menu is enabled.Even if this option is set to Boot, operationstops at the end of POST if errors occurredfor all resources.Power Switch Inhibit [Disabled]EnabledEnables or disables POWER Switch inhibitfeature.CLI SETUP [Disabled]EnabledEnables or disables the Command LineInterface SETUP feature. When this option isset to Enabled, the operation of SETUP ischanged to use Command Line Interface. Toswitch back to the menu operation, set thisoption to Disabled.For command details, execute HELPcommand at CLIP SETUP prompt. If thesystem is connected with bootabledevices exceeding a certain number ofdevices, an error message "Failed to getBoot Variable data" appears oncommand line, and the Boot menu is notdisplayed or changing parameter isdisabled. In this case, reduce thenumber of bootable devices bydisconnecting any USB devices notrequired for bootup, or changeparameter [Option ROM Scan] foronboard device or PCI slot to [Disabled.][ ]: Factory settings