3. Power Control FeatureExpress5800/T120e Maintenance Guide 85Chapter 2 Useful Features3. Power Control FeatureFor a device that has a Xeon Processor, power consumption of the server can be controlled through thecommand line interface of EXPRESSSCOPE Engine 3 (BMC) or by using NEC ESMPRO Manager. Thisfeature curves the upper limit of the power consumption, which allows more servers to be installed in theenvironment where the power consumption is limited.For settings information, see "EXPRESSSCOPE Engine3 User’s Guide" or NEC ESMPRO Manager onlinehelp.3.1 Supported OSThe power control feature is available for the following OSs.OSs that support the power control feature Windows Server 2003 R2, Standard Edition (SP2 or later) Windows Server 2003 R2, Enterprise Edition (SP2 or later) Windows Server 2003 R2, Standard x64 Edition (SP2 or later) Windows Server 2003 R2, Enterprise x64 Edition (SP2 or later) Windows Server 2008, Standard Windows Server 2008, Enterprise Windows Server 2008, Standard x64 Windows Server 2008, Enterprise x64 Windows Server 2008 R2, Standard x64 Windows Server 2008 R2, Enterprise x64 Red Hat Enterprise Linux 5.9 or later (x86) Red Hat Enterprise Linux 5.9 or later (EM64T) Red Hat Enterprise Linux 6.4 or later (x86) Red Hat Enterprise Linux 6.4 or later (x86_64)3.2 Notes on Using Windows Server 2008Ignore the following event when running Windows Server 2008. This event is logged at the normal operationof controlling the server power.Source: Kernel-Processor-PowerEvent ID: 7Level: WarningUser: SYSTEM
