203. Projecting an Image (Basic Operation)Place your projector on a flat level surface and ensure that theprojector is square to the screen.Lift the front edge of the projector to center the image verti-cally.* If the projected image does not appear square to thescreen then use the Keystone feature for proper adjust-ment. (→ page 25)➌ Adjusting the Picture Size and PositionAbout Auto FocusJust placing the projector on a flat level surface makes a fo-cused image. (→ page 22)Move the projector left to center the image horizontally on thescreen.About Auto Keystone CorrectionAdjusting the height of a projected image or changing the pro-jection angle will result in the Auto Keystone function quicklycorrecting the vertical distortion. (→ page 23)
