25SELECT SOURCEAUTOADJ.ON/STAND BYFOCUSLAMPSTATUSPOWER➎ Correcting Keystone Distortion ManuallyYou can also correct the vertical keystone distortion manually.NOTE: Manual keystone correction is not available when there is no signal received by any input.Adjust the keystone distortion manually in the following cases:• To fine tune Keystone correction even after performing the [Auto Keystone] adjustment• When the menu setting for [Auto Keystone] is turned offAdjusting with buttons on the cabinet3. Projecting an Image (Basic Operation)1. Press the SELECT ▲ or ▼ button with nomenus displayed.The slide bar will be displayed for your adjust-ment.2. Press the EXIT button.The slide bar will be closed.Adjusting with the remote control1. Press the MENU button.The menu will be displayed.2. Use the SELECT ▼ button to select [Setup -General] and then press the ENTER button.3. Select the Keystone function.Use the SELECT ▼ button to select [Keystone].
