607. Appendix➏ PC Control Codes and Cable ConnectionPC Control CodesFunction Code DataPOWER ON 02H 00H 00H 00H 00H 02HPOWER OFF 02H 01H 00H 00H 00H 03HINPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09HINPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EHINPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13HPICTURE MUTE ON 02H 10H 00H 00H 00H 12HPICTURE MUTE OFF 02H 11H 00H 00H 00H 13HCable ConnectionCommunication ProtocolBaud rate .........................................38400 bpsData length ......................................8 bitsParity...............................................No parityStop bit............................................One bitX on/off ...........................................NoneCommunications procedure ...........Full duplexNOTE: Depending on the equipment, a lower baud rate may be recommended for long cable runs.NOTE: Contact your local dealer for a full list of the PC Contorol Codes if needed.1 23 4 56 7 8To RxD of PCPC Control Connector (DIN-8P)To TxD of PC To GND of PCNOTE : Pins 2, 3, 5 and 6 are used inside the projector.
