ISSUE 1.0NVR Configuration Guide (Advanced) for NRS Expanded Series 11-175. Configure the following Email settings: Enable Server Authentication (optional): Check the Enable ServerAuthentication checkbox to enable the server authentication feature.User Name: The user name of sender’s account registered on the SMTPserver.Password: The password of sender’s account registered on the SMTPserver. SMTP Server: The SMTP Server IP address or host name (e.g.,smtp.263xmail.com). SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is25. Enable SSL (optional): Click the Enable SSL checkbox to enable SSL ifrequired by the SMTP server. Sender: The name of sender. Sender’s Address: The Email address of the sender. Select Receivers: Select the receiver. A maximum of three receivers canbe configured. Receiver: The name of the user to be notified. Receiver’s Address: The Email address of the user to be notified. Enable Attached Picture: Check the Enable Attached Picturecheckbox if you want to send Email with attached alarm images. Theinterval is the time of two adjacent alarm images. You can also set SMTPport and enable SSL. Interval: Refers to the time between two actions for sending attachedpictures.Figure 11-21 Email Settings Screen
