ISSUE 1.0NVR Configuration Guide (Advanced) for NRS Expanded Series 1-5Table 1-2 Descriptions of Front Panel 2 ButtonsNo. Name Function Description1 Power ON/OFF Power on/off switch.2 USB Interface Connect to USB mouse or USB flash memory.4POWER Power indicator lights in green when DVR is powered up.READY Ready indicator is normally green, indicating that the DVR is functioningproperly.STATUS Indicator turns red when the SHIFT button is used.Indicator does not light when the DVR is controlled by a keyboard.ALARM Alarm indicator turns red when a sensor alarm is detected.HDD HDD indicator blinks in red when data is being read from or written to HDD.TX/RX TX/RX indicator blinks in green when network connection is functioning properly.5 DVD-ROM Slot for DVD-ROM.6DirectionThe DIRECTION buttons are used to navigate between different fields and itemsin menus.In Playback mode, the Up and Down button is used to speed up and slow downrecorded video.In All-day Playback mode, the Left/Right button can be used to select therecorded video of next/previous day; in Playback by Normal Video Search, theLeft/Right button can be used to select the next/previous recorded file.In Live View mode, the directional buttons can be used to cycle throughchannels. In PTZ control mode, it can control the movement of the PTZ camera.EnterConfirm selection in any of the menu modes. It can also be used to tickcheckbox fields.In Playback mode, it can be used to play or pause the video.In Single-frame Playback mode, pressing the ENTER button advances the videoby a single frame.In Auto-switch mode, it can be used to stop/start auto switch.In Auto-switch mode, it can be used to stop/start auto switch.
