ISSUE 1.0NVR Configuration Guide (Advanced) for NRS Expanded Series 4-52. Select patrol No. in the dropdown list of patrol.3. Click the Set button to add key points for the patrol.4. Configure key point parameters, such as the Key Point No., duration ofstaying for one key point and speed of patrol. The key point iscorresponding to the preset. The Key Point No. determines the order thePTZ follows while cycling through the patrol. The Duration refers to the timespan to stay at the corresponding key point. The Speed defines the speed atwhich the PTZ moves from one key point to the next.5. Click the Add button to add the next key point to the patrol or you can clickthe OK button to save the key point to the patrol.You can delete all key points for the selected patrol by clicking the Clearbutton or click the Clear All button to delete all the key pints for all patrols.2.4 Calling PatrolsCalling a patrol causes the PTZ to move according the predefined patrol path.1. Select one of the following to show the PTZ control panel : Click the PTZ button in the lower-right corner of the PTZ settings screen. Press the PTZ button on the front panel. Click the PTZ Control icon in the quick setting bar. Select the PTZ option from the right-click menu.2. Click the button to show the general settings of the PTZ control.Figure 4-6 KeyPoint ConfigurationFigure 4-7 PTZ Panel – General
