1446. Installation and ConnectionsDigital RGB signal connection• Connect a commercially available HDMI cable between the computer’s HDMI output connector and the projector’sHDMI input connector.• Connect a commercially available DisplayPort cable between the computer’s DisplayPort output connector andthe projector’s DisplayPort input connector.• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlHDMI IN HDMI HDMIDisplayPort DisplayPort DisplayPortNOTE:• Turn off the power of the computer and projector before connecting.• Lower the computer’s volume setting before connecting an audio cable to the headphones connector. When using with a computerconnected to the projector, adjust the volume of both the projector and computer to set the appropriate volume level.• If the computer has a mini-jack type audio output connector, we recommend connecting the audio cable to that connector.• This projector does not support NEC video unit (model ISS-6020) video decoded outputs.• When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding andrewinding.TIP• The Computer 1 and Computer 2 video input connectors support Windows Plug and Play. The Computer 3 video input connectordoes not support Windows Plug and Play.• A Macintosh signal adapter (commercially available) may be required to connect a Macintosh computer.To connect a Macintosh computer equipped with a Mini DisplayPort to the projector, use a commercially available Mini DisplayPort→ DisplayPort converter cable.HDMI cable (not supplied)DisplayPort cable (not supplied)
