1768. User SupportwareBasic Operation of Image Express Utility 2.0This section explains the following three cases as examples of operating Image Express Utility 2.0.(1) Transferring images to the projector(2) Holding a conference(3) Participating in a conferenceSending Images to Projector• Connecting projector1 Turn on the power to the projector for which LAN has been set.2 Click Windows [Start] → [All Programs] → [NEC Projector User Supportware] → [Image Express Utility 2.0]→ [Image Express Utility 2.0 ], in that order.The “Selection Of Network Connections” window will be displayed.A list of the network equipment connected to your computer will be displayed.IMPORTANT:A screen like the one below is displayed when the software is started on a PC installed with Windows XP Service Pack 2 (SP2) (orlater).Click “Unblock” if this is displayed.3 Select the network equipment that is to be used and click [OK].Select the network device displaying “Easy Connection” if the product LAN setting is for “Easy Connection.” Thiswill call up the “Projector List” window.
