NEC PA500U User Manual

Also see for PA500U Series: Command guide User manual Specification Installation guide Specifications

Contents

NEC PA500U User Manual Manual pdf 6 page image

ivImportant Information• Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire.- Do not use any power cord other than the one supplied with the projector.- Do not bend or tug the power cord excessively.- Do not place the power cord under the projector, or any heavy object.- Do not cover the power cord with other soft materials such as rugs.- Do not heat the power cord.- Do not handle the power plug with wet hands.• Turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel underthe following conditions:- When the power cord or plug is damaged or frayed.- If liquid has been spilled into the projector, or if it has been exposed to rain or water.- If the projector does not operate normally when you follow the instructions described in this user’s manual.- If the projector has been dropped or the cabinet has been damaged.- If the projector exhibits a distinct change in performance, indicating a need for service.• Disconnect the power cord and any other cables before carrying the projector.• Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.• Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.• When using a LAN cable:For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.CAUTION• Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot orhanging on the wall can cause damage to the projector.• Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector insidethe soft case could be damaged.• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select[SETUP] → [OPTIONS(1)] → [FAN MODE] → [MODE] → [HIGH].)• Do not move the projector by holding the cable cover. Doing so may result in the projector falling or causinginjury.• Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projectorand starting to display an image.• Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing socan cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switchand a breaker.• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator isblinking blue. Doing so could cause premature lamp failure.Caution on Handling the Optional LensWhen shipping the projector with the lens, remove the lens before shipping the projector. Always attach the dust capto the lens whenever it is not mounted on the projector. The lens and the lens shift mechanism may encounter damagecaused by improper handling during transportation.Do not hold the lens part when carrying the projector.Doing so could cause the focus ring to rotate, resulting in accidental dropping of the projector.Remote Control Precautions• Handle the remote control carefully.• If the remote control gets wet, wipe it dry immediately.• Avoid excessive heat and humidity.• Do not short, heat, or take apart batteries.