212. Projecting an Image (Basic Operation)Adjusting the Tilt Feet1. Turn the left and right tilt feet to adjust.The tilt feet lengthen and shorten when turned.The height of the projected image is adjusted by turning the leftand right tilt feet.If the projected image is tilted, turn one of the tilt feet to adjustthe image so that it is level.- If the projected image is distorted, see “2-6 Correcting KeystoneDistortion” (→ page 22).- The tilt feet can be lengthened by a maximum of 20 mm.- The tilt feet can be used to tilt the projector by a maximum of 4º.NOTE:• Do not lengthen the tilt feet any more than 20 mm/0.8". Doing so will make thetilt feet’s mount section unstable and could cause the tilt feet to come off theprojector.• Do not use the tilt feet for any purpose other than adjusting the projector’sprojection angle.Handling the tilt feet improperly, such as carrying the projector by grasping the tiltfeet or hooking it onto a wall using the tilt feet, could damage the projector.ZoomTurn the zoom lever or zoom ring clockwise and counterclockwise.- The separately sold NP11FL lens does not have a zoom ring.Zoom ringUpTilt footDown
