![NEC PA500U User Manual Manual pdf 16 page image](https://manuals-archive2.s3.amazonaws.com/5386845/1630ecca1fe510ebd83971738b05ae9e16f.jpg)
41. Introduction Part Names of the ProjectorFront/TopThe lens is sold separately. The description below is for when the NP13ZL lens is mounted.Control Panel(→ page 6)Lens Shift Dial (vertical/horizontal)(→ page 18)LensRemote Sensor (located on thefront and the rear)(→ page 9)Remote Sensor(→ page 9)Zoom Lever/Zoom Ring (→ page 21)Lens Cap(The optional lens is shipped withthe lens cap.)Focus Ring(→ page 19)Adjustable Tilt Foot(→ page 21)Indicator Section(→ page 6)Lens Release Button(→ page 142)Adjustable Tilt Foot(→ page 21)Ventilation (outlet)Heated air is exhausted from here.Mounting the straps1. Mount the straps to the filter cover and lamp cover as shown on the diagram below.2. Insert the knot in the strap into the hole on the bottom of the projector and pull in the direction of the arrowto fasten.1 2Lamp Cover (→ page 160)Security BarAttach an anti-theft device.The security bar accepts securitywires or chains up to 0.18 inch/4.6mm in diameter.Monaural Speaker (10 W)Lamp cover strap insertion hole Filter cover strap insertion hole