985. Using On-Screen Menu[VIDEO]Using Noise Reduction [NOISE REDUCTION]This function is used to reduce video noise.RANDOM NR ��������� Reduces flickering random noise in an image�MOSQUITO NR ������ Reduces mosquito noise that appears around the edges of an image during DVD playback�BLOCK NR ������������� Reduces block noise or mosaic-like patterns by selecting ON�Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]This function allows you to select an interlaced-to-progressive conversion process for video signals.AUTO ��������������������� Determines an appropriate interlaced-to-progressive conversion process automatically�VIDEO �������������������� Applies a normal interlaced-to-progressive conversion process�FILM ���������������������� Applies the automatic detection mode for telecine signals� This option is recommended for a movie pic-ture�NOTE: This function is not available with RGB signals.Turning On or Off the 3D Dimensional Separation [3D Y/C SEPARATION]When projecting an image from a VIDEO input, set to ON to project the highest quality image.OFF ������������������������ Turns off the 3 dimensional separation feature�ON ������������������������� Turns on the 3 dimensional separation feature�NOTE: Only available for NTSC 3.58 video signals.[DETAIL ENHANCEMENT]This function enhances the contours of the image when projecting component signals.[SIGNAL TYPE]The projector automatically identifies whether the COMPUTER 1, COMPUTER 2 or COMPUTER 3* input signals areRGB or component signals to project the image. If the colors are unnatural, however, try switching the setting.* For COMPUTER 3, the computer signal and video signal can be selected at SIGNAL SELECT(COMP3).RGB ����������������������� Switches to the RGB input�COMPONENT ��������� Switches to the component signal input�Downloaded From projector-manual.com NEC Manuals
