875. Using On-Screen Menu4 Menu Descriptions & Functions [SOURCE]COMPUTER 1, 2, and 3Selects the computer connected to your COMPUTER 1, 2, or COMPUTER 3 input connector signal.NOTE: When the component input signal is connected to the COMPUTER 1 IN, COMPUTER 2 IN, or COMPUTER 3 IN connector, select[COMPUTER1], [COMPUTER2] or [COMPUTER3] respectively. The projector automatically determines whether the COMPUTER1,2, or 3 input signal is an RGB or component signal.HDMISelects the HDMI compatible equipment connected to your HDMI IN connector.DisplayPortProjects the image of the device connected to the DisplayPort input connector.VIDEOSelects what is connected to your VIDEO input-VCR, DVD player or document camera.S-VIDEOSelects what is connected to your S-VIDEO input-VCR or DVD player.NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-Video source.VIEWERThis feature enables you to make presentations using a USB memory that contains slides.(→ page 56 “4. Using the Viewer”)NETWORKSelects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional for models for Europe,Australia, Asia and other countries than North America).ENTRY LISTDisplays a list of signals. See the following pages.TEST PATTERNCloses the menu and switches to the test pattern screen. The previous screen reappears when the EXIT button ispressed.Downloaded From projector-manual.com NEC Manuals
