1486. Installation and ConnectionsConnecting Component Input• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlCOMPUTER 1 IN COMPUTER 1 COMPUTER 1COMPUTER 2 IN COMPUTER 2 COMPUTER 2COMPUTER 3 IN COMPUTER 3 COMPUTER 3NOTE:• Normally the computer signal and component signal are identified and switched automatically. If the signal cannot be identified,however, select the signal at [ADJUST] → [VIDEO] → [SIGNAL TYPE] on the projector’s on-screen menu. Select “COMPUTER” or“VIDEO” for the Computer 3 video input connector at [SETUP] → [OPTION (1)] → [SIGNAL SELECT(COMP3)] (→ page 109).• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).15-pin - to - RCA (female) × 3cable adapter (ADP-CV1E)RCA (female) - to - BNC (male)connector (not supplied)Stereo mini plug - to - RCA audiocable (not supplied)Component video RCA × 3 cable(not supplied)DVD player Audio EquipmentDownloaded From projector-manual.com NEC Manuals
