1315. Using On-Screen MenuReturning to Factory Default [RESET]The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) exceptthe following:[CURRENT SIGNAL]Resets the adjustments for the current signal to the factory preset levels.The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS-PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].[ALL DATA]Reset all the adjustments and settings for all the signals to the factory preset.All items can be reset EXCEPT [ENTRY LIST], [LANGUAGE], [BACKGROUND], [FILTER MESSAGE], [EDGE BLEND-ING], [MULTI SCREEN], [SCREEN TYPE], [GEOMETRIC CORRECTION], [REF. WHITE BALANCE], [STATIC CON-VERGENCE], [ADMINISTRATOR MODE], [CONTROL PANEL LOCK], [SECURITY], [COMMUNICATION SPEED],[DATE AND TIME SETTINGS], [CONTROL ID], [STANDBY MODE], [FAN MODE], [LAMP LIFE REMAINING], [LAMPHOURS USED], [FILTER HOURS USED], [TOTAL CARBON SAVINGS], [WIRED LAN], and [WIRELESS LAN].To reset the lamp usage time, see “Clearing Lamp Hour Meter [CLEAR LAMP HOURS]” below.[ALL DATA (INCLUDING ENTRY LIST)]Reset all the adjustments and settings for all the signals to the factory preset except [LANGUAGE], [BACKGROUND],[FILTER MESSAGE], [EDGE BLENDING], [MULTI SCREEN], [SCREEN TYPE], [GEOMETRIC CORRECTION],[REF. WHITE BALANCE], [STATIC CONVERGENCE], [ADMINISTRATOR MODE], [CONTROL PANEL LOCK], [SE-CURITY], [COMMUNICATION SPEED], [DATE AND TIME SETTINGS], [CONTROL ID], [STANDBY MODE], [FANMODE], [LAMP LIFE REMAINING], [LAMP HOURS USED], [FILTER HOURS USED], [TOTAL CARBON SAVINGS],[WIRED LAN], and [WIRELESS LAN].Also deletes all the signals in the [ENTRY LIST] and returns to the factory preset.NOTE: Locked signals in Entry List cannot be reset.Clearing Lamp Hour Meter [CLEAR LAMP HOURS]Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and pressthe ENTER button.NOTE:• Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.• Performing [CLEAR LAMP HOURS] will return the [LAMP ADJUST] in [LAMP MODE] to its default adjustments. When the projec-tor is used for multi-screen projection, use [LAMP ADJUST] to adjust the brightness again.
