443. Convenient Features❾ Controlling the Projector by Using an HTTP BrowserOverviewUsing the web browser on the computer, the HTTP server screen of the projector can be displayed to operate theprojector.For the HTTP server screen of the projector, there is the basic HTTP server screen (common to both HDBaseT modelsand MM models) and the dedicated HTTP server screen for MM models.Possible operations on the HTTP server screen(1) Possible operations on the basic HTTP server screen (common to both HDBaseT models and MMmodels)• When using the following functions, configure the settings required for connecting the projector to the network(wired LAN). (NETWORK SETTINGS)• PC Control Utility Pro 4/Pro 5• Virtual Remote Tool• Configure the email notification. (ALERT MAIL)When the projector is connected to a network (wired LAN), notifications on the lamp replacement period and vari-ous errors are sent to the email address that has been set up.• Operate the projector.Operations such power on/off of the projector, input terminal switchover, volume control, picture control etc. canbe carried out.• Configure the [PJLink PASSWORD] and [AMX BEACON] etc.(2) Possible operations on the dedicated HTTP server screen for MM models• When using the following functions on the MM models, configure the settings required to connect the projector tothe network (wired LAN/wireless LAN).• Image Express Utility Lite• Image Express Utility 2.0• Desktop Control Utility 1.0• Network Projector• Remote Desktop• Viewer (when a shared folder/media server is used)To view the HTTP server screen(1) Basic HTTP server screen (common to both HDBaseT models and MM models)1. Connect the projector to the computer with a LAN cable sold commercially. (→ page 169)2. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN] in the on-screen menu to configure the networksettings. (→ page 122)3. Start up the web browser on your computer and enter the address or URL in the input field.Specify the address or URL as “http:// Address of Projector>/index.html”.The basic HTTP server screen will be displayed.(2) HTTP server screen for MM models only1. Connect the projector to the computer with a LAN cable sold commercially. (→ page 169) Alternatively,install a wireless LAN unit sold separately. (→ page 170)2. Select [INPUT TERMINAL] → [ETHERNET] in the on-screen menu.The application menu will be displayed.3. Select “NETWORK SETTINGS (MM)” and configure the network settings. (→ page 138)TIP:• If you want to set the IP address here, set a different IP address in the same segment as the IP address that has been set upin the basic HTTP server screen.
