1496. Installation and ConnectionsConnecting several projectorsIt enables to project HDMI, DisplayPort, HDBaseT image on several projectors connecting the HDBaseT IN/Ethernetport and the HDBaseT OUT/Ethernet port by LAN cable. The projectors support same brightness and resolution canbe connected up to four units,HDBaseT OUT/EthernetHDBaseT IN/Ethernet• The signal from the COMPUTER IN terminal is not output from the HDBaseT OUT/Ethernet port of this projector.• Projectors of which brightness and resolution are different, these can not be connected even if these are in sameseries. At the same time, this projector is not guaranteed to work correctly in the connection with an other deviceas a monitor.• When outputting HDMI signals, turn on the power of the video device on the output side and keep it connectedbefore inputting video signals into this device. The HDMI output terminals of the projector are equipped with repeaterfunctions. When a device is connected to the HDMI output terminal, the resolution of the output signal is limited bythe resolution supported by the connected device.• Connecting and disconnecting an HDMI cable or selecting another input source on the second and subsequentprojectors will disable the HDMI repeater function.Master projectorOther projector
