222. Projecting an Image ( Basic Operation)Adjusting the vertical position of a projected image (Lens shift)CAUTION• Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose youreyes to strong light which could injure them.• Keep hands away from the lens mounting portion while performing a lens shift. Failure to do so could result infingers being pinched by the moving lens.1. Press either SHIFT/HOME POSITION button on the cabinet or LENSSHIFT BUTTON on the remote control.The [LENS SHIFT] screen will be displayed.2. Press the ▼▲◀▶ buttons to move the projected image.• To set back the lens to the home positionPress and hold the SHIFT/HOME POSITION button over 2 seconds. The lens mounted on the projector goesback to the home position. (roughly to the center position)NOTE:• If the lens is shifted to the maximum in the diagonal direction, the screen peripheral area will be dark or shaded.• Use NP11FL at the home position.
