493. Convenient Features❿ Controlling the Projector by Using an HTTP BrowserOverviewUsing the web browser on the computer, the HTTP server screen of the projector can be displayed to operate theprojector.Possible operations on the HTTP server screen• Configure the settings required for connecting the projector to the network (wired LAN). (NETWORK SETTINGS)• Configure the email notification. (ALERT MAIL)When the projector is connected to a network (wired LAN), notifications on the lamp replacement period and vari-ous errors are sent to the email address that has been set up.• Operate the projector.Operations such power on/off of the projector, input terminal switchover, volume control, picture control, and lenscontrol etc. can be carried out.• Configure the [PJLink PASSWORD], [AMX BEACON], and [CRESTRON] etc.To view the HTTP server screen1. Connect the projector to the computer with a LAN cable sold commercially. (→ page 152)2. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN] in the on-screen menu to configure the networksettings. (→ page 126)3. Start up the web browser on your computer and enter the address or URL in the input field.Specify the address or URL as “http:///index.html”.The basic HTTP server screen will be displayed.TIP: The factory setting IP address is [DHCP ON].NOTE:• To use the projector in a network, consult with your network administrator about network settings.• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network.Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed inrapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projec-tor.• If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your webbrowser (or clear the cache).• This projector uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method willvary depending on the version of browser. Please refer to the help files and the other information provided in your software.Preparation before UseConnect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 152)Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and thesetting method. Although the type of proxy server will be a factor, it is possible that items that have actually been setwill not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not bereflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.
