714. Multi-Screen ProjectionPreparation:• Turn on the projector and display a signal.• When performing settings or adjustments using one remote control, enable the [CONTROL ID] for assigning ID toeach projector so as not to activate the other projectors. (→ page 123)Setting the overlap of projection screens① Enable [EDGE BLENDING].1 Press the “Edge Blend.” button.The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER but-ton. The mode screen will be displayed.2 Select [MODE] → [ON] and press the ENTER button.This enables the Edge Blending function. The following menu items are available:[TOP], [BOTTOM], [LEFT], [RIGHT], [BLACK LEVEL], and [BLEND CURVE]3 Select [RIGHT] for Projector A and [LEFT] for Projector B.Press the ENTER button.The following items are available:[CONTROL], [MARKER], [RANGE], and [POSITION]
