292. Projecting an Image ( Basic Operation)Adjusting the Tilt Foot1. Turn the left and right tilt foot to adjust.The tilt foot lengthen and shorten when turned.Turn one of the tilt foot to adjust the image so that it is level.• If the projected image is distorted, see “3-6 Correcting Horizontaland Vertical Keystone Distortion [CORNERSTONE]” (→ page 38)and “[GEOMETRIC CORRECTION]” (→ page 103).• The tilt foot can be lengthened by a maximum of 20 mm.• The tilt foot can be used to tilt the projector by a maximum of 4°.NOTE:• Do not lengthen the tilt foot any more than 20 mm/0.8". Doing so will make thetilt foot’s mount section unstable and could cause the tilt foot to come off theprojector.• Do not use the tilt foot for any purpose other than adjusting inclination of theprojector installation angle.Handling the tilt foot improperly, such as carrying the projector by grasping thetilt foot or hooking it onto a wall using the tilt foot, could damage the projector.UpTilt footDown
