1385. Using On-Screen Menu8 Menu Descriptions & Functions [RESET]Returning to Factory Default [RESET]The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) exceptthe following:[CURRENT SIGNAL]Resets the adjustments for the current signal to the factory preset levels.The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].[ALL DATA]Reset all the adjustments and settings for all the signals to the factory preset.All items can be reset EXCEPT [ENTRY LIST], [LANGUAGE], [BACKGROUND], [FILTER MESSAGE], [SCREEN],[GEOMETRIC CORRECTION], [MULTI-SCREEN COMP.], [REF.WHITE BALANCE], [CONTROL PANEL LOCK],[SECURITY], [COMMUNICATION SPEED], [CONTROL ID], [SEAMLESS SWITCHING], [STANDBY MODE],[FAN MODE], [EDGE BLENDING], [REF. LENS MEMORY], [DATE AND TIME], [LAMP LIFE REMAINING], [LAMPHOURS USED], [FILTER HOURS USED], [TOTAL CARBON SAVINGS], [WIRED LAN], and [WIRELESS LAN].To reset the lamp usage time, see “Clearing Lamp Hour Meter [CLEAR LAMP HOURS]” below.[ALL DATA (INCLUDING ENTRY LIST)]Reset all the adjustments and settings for all the signals to the factory preset except [LANGUAGE], [BACKGROUND],[FILTER MESSAGE], [SCREEN], [MULTI-SCREEN COMP.], [REF. WHITE BALANCE], [CONTROL PANEL LOCK],[SEAMLESS SWITCHING], [SECURITY], [COMMUNICATION SPEED], [CONTROL ID], [FAN MODE], [EDGE BLEND-ING], [GEOMETIRC CORRECTION], [REF. LENS MEMORY], [DATE AND TIME], [STANDBY MODE], [LAMP LIFEREMAINING], [LAMP HOURS USED], [FILTER HOURS USED], [TOTAL CARBON SAVINGS], [WIRED LAN], and[WIRELESS LAN].Also deletes all the signals in the [ENTRY LIST] and returns to the factory preset.NOTE: Locked signals in Entry List cannot be reset.Clearing Lamp Hour Meter [CLEAR LAMP 1 HOURS/CLEAR LAMP 2 HOURS]Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and pressthe ENTER button.NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after thelamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press theHELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.
