1746. Installation and ConnectionsConnecting to a Wireless LAN (sold separately)The separately sold wireless LAN unit allows you to use a wireless LAN environment. When using the projector in awireless LAN environment, the IP address and other settings must be made on the projector.Important:• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment isprohibited, remove the USB Wireless LAN Unit from the projector.• Buy the appropriate USB Wireless LAN Unit for your country or area.NOTE:• The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working.• Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard.Flow of Setting Wireless LANStep 1: Attach the USB Wireless LAN Unit to the projector. (→ page 175)Step 2: Display [NETWORK SETTINGS] from [APPLICATION MENU]. (→ page 142)Step 3: Select [NETWORK SETTINGS] → [WIRELESS LAN] → [PROFILES] and set [EASY CONNECTION],[PROFILE 1], or [PROFILE 2]. (→ page 143)TIP:Access the HTTP server function to set [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS] → [EASY CONNECTION] , [PRO-FILE1], [PROFILE2].Mounting a wireless LAN unitNOTE:• The wireless LAN unit has a front and a back and must be mounted in the wireless LAN port in a specific direction. The port isdesigned so that the unit cannot be mounted in the opposite direction, but trying to push it in by force could damage the wirelessLAN unit port.• To prevent damage due to static electricity, touch a nearby metal object (a door knob, aluminum sash, etc.) before touching thewireless LAN unit to eliminate the static electricity from your body.• Turn off the main power before mounting and removing the wireless LAN unit.Mounting and removing the wireless LAN unit while the projector’s power is on could damage the wireless LAN unit or result inmalfunction on the projector. If the projector should malfunction, turn off the projector’s power, turn off the main power switch,and unplug the power cord, then plug the power cord back in.• Do not connect any USB device other than the wireless LAN unit to the USB (LAN) port. Also, do not connect the wireless LANunit to the USB port in the connector section.
