2068. User Supportware Projecting Your Mac’s Screen Image from the Projector overa LAN (Image Express Utility 2 for Mac)Using Image Express Utility 2 for Mac contained allows you to send the Mac’s screen image to the projector over anetwork (wired or wireless LAN).Image Express Utility 2 for Mac runs on Mac OS X 10.2.8 or later.It runs on both Mac OS X (PowerPC) and Mac OS X (Intel).Hereafter, “Image Express Utility 2 for Mac” is abbreviated as “Image Express Utility 2”.What you can do with Image Express Utility 2• Via the network images on the screen of your Mac can be sent to the projector and projected on the screen.• One computer can send images to more than one projector.Operating environmentSupported OSMac OS X 10.2.8 or later requiredMac OS X 10.3.0 or later recommendedProcessor (CPU)PowerPC G3 600 MHz processor requiredPowerPC G4 800 MHz or higher recommendedorIntel Core Solo 1.5 GHz or higher requiredMemory256 MB or higher requiredNetwork environmentWired or wireless LAN required that supports TCP/IPOnly the AirPort and AirPort Extreme wireless LAN cards are guaranteed to work with Image Express Utility 2.“Easy Connection” supports only AirPort and AirPort Extreme.Supported resolutionVGA (640 × 480) or higher requiredXGA (1024 × 768) recommended(1024 × 768 - 1280 × 800 recommended)Supported screen colors32 thousands of colors, 16.7 million colors required* 256 or fewer colors are not supported.Connecting the projector to a LANConnect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 173), “Con-necting to a Wireless LAN” (→ page 174) and “9 Application Menus - NETWORK SETTINGS” (→ page 142)
