1716. Installation and ConnectionsConnecting Component Input• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlCOMPUTER 1 IN COMPUTER 1 COMPUTER 1COMPUTER 2 IN COMPUTER 2 COMPUTER 2COMPUTER 3 IN COMPUTER 3 COMPUTER 3NOTE:• Normally the computer signal and component signal are identified and switched automatically. If the signal cannot be identified,however, select the signal at [ADJUST] → [VIDEO] → [SIGNAL TYPE] on the projector’s on-screen menu. Select “COMPUTER” or“VIDEO” for the Computer 3 video input connector at [SETUP] → [OPTION (1)] → [SIGNAL SELECT(COMP3)] (→ page 130).• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).15-pin - to - RCA (female) × 3 cable adapter(ADP-CV1E)BNC (male) to RCA (female)adapter (not supplied)Component video RCA × 3 cable (not supplied)DVD player Audio Equipment
